HomeHomeOur OfferingOur OfferingProductsProductsEnterprise Wireless Access PointsEnterprise Wireless Access PointsExtricom RP-33nExtricom RP-33n
Our Offering

Extricom RP-33n

Extricom’s 3-radio 802.11a/b/g/n tripple stream access point, for high throughput applications.

Extricom RP-33n

The Extricom RP-33n is a powerful 802.11n access point with three on-board radios and internal antennas for maximum throughput and easy deployment of 802.11n with or without legacy Wi-Fi.
The EXRP-33n is equipped with three a/b/g/n radios, each of which can be operated on the 2.4 GHz or 5 GHz band to provide network administrators with the ultimate in RF deployment flexibility. Since most of the system intelligence resides in the Extricom WLAN switch, AP installation is truly plug-and-play. APs can be deployed in any density, with whatever spacing needed to guarantee high-quality, high-speed connectivity everywhere.

 

Key Benefits

  • High throughput due to very efficient use of 2.4 and 5 GHz bands by Channel Blanket™ architecture
  • Rock-solid wireless connections that behave like wire
  • Full support for 802.11a/b/g/n devices 
  • 3 internal 802.11a/b/g/n radios, supporting, up to 3 channel blankets
  • Rogue detection
  • GbE port for AP to switch communication
  • 802.3af PoE supports maximum air rate on all radios


Key Features

  • Tri-Radio Access Point with Integrated Antennas - Works in Mixed 802.11 a/b/g/n Environments.
  • Up to 450 Mbps air rate (Up to 260 Mbps TCP traffic)
  • With 3x3:3 Spatial Stream MIMO
  • Transmit Beam forming (TxBF) for signal phase alignment and improved range*
  • Space Time Block Cycle (STBC) provides added robustness for an environment where there are multiple transmit chains and only a single receiver chain*
  • Low Density Parity Check (LDPC) technology provides improved performance in error detection and correction*
  • Maximum Likelihood (ML) detector to achieve higher accuracy demodulation
  • Maximal Ratio Combining (MRC)
  • Rx Peak Detection for interference detection, providing better performance in environments with a high level of interference
  • WEP, TKIP and AES hardware encryption

* Future firmware upgrade required


The Extricom Difference

Simpler Installation and Maintenance. The Extricom WLAN eliminates complex cell-planning, making installation much easier.  Its easy to use management interface also simplifies system setup and maintenance.

Full Performance In Mixed Environment. Extricom Channel Blanket deployment of Extricom RP-33n APs permits ‘n’ and legacy ‘a/b/g’ devices to co-exist, in either band, with full speed and throughput maintained for all.

Continuous Mobility. Client devices move anywhere within the Extricom Channel Blanket without experiencing inter-AP handoffs, re-authentication or latency, enabling no-handoff mobility for enterprise wireless LANs.

Centralized Access. Extricom switches coordinate media access for all of the connected APs and eliminate co-channel interference, which leads to higher performance and more stable operation under heavy load.

Centralized Power. The Extricom WLAN switch supplies power for all the connected Extricom UltraThin APs through built-in PoE, eliminating the need for AC power at the APs.

Service Flexibility. Extricom’s multi-layer, multi-channel architecture with overlapping Channel Blankets provides physical segregation of wireless clients and applications. Voice clients can be isolated on one channel, and data clients on another. This flexible approach translates into higher throughput, more stable and predictable wireless LAN performance and the ability to offer service level guarantees.

TrueReuse™. An Extricom patented technology, increases capacity by permitting simultaneous transmissions on the same channel within the Channel Blanket.



Resources

 

Stay Connected